RISLONE Transmission Stop Slip W/Leak Repair

• Renews and Stabilizes Automatic Transmission Fluid
• Stops Fluid Loss
• Reduces Friction & Wear
• Protects Internal Components
  

Dosage & Directions

Dosage
Rislone Transmission Stop Slip with Leak Repair, is designed to treat 12 to 16L of transmission fluid. For compact and smaller vehicles, use ½ a bottle.

Directions
For Automatic Cars
Add to existing transmission fluid while idling. Do not overfill. For compact and smaller vehicles, use ½ bottle. 

For Manual Cars
Top off fluid as necessary.

For severely worn transmissions, change transmission fluid and install complete bottle. Results will either be immediate or noticeable within a few days of driving. Will not void manufacturer’s warranty.

Automatic Transmission (Adding to Existing Fluid)
Remove transmission dipstick and check fluid level. For most vehicles this is usually done while the engine is running and the transmission is in Park. Some vehicles do not have a normal dipstick. For those, the product has to be added to the transmission through a fill plug. Consult owner’s manual for location. If fluid is low, pour entire contents of the bottle into the dipstick tube. Do NOT overfill. For compact and smaller vehicles, use ½ of the bottle. If necessary, to prevent overfill, drain some fluid from transmission. Check fluid level again. Top off with manufacturer’s recommended transmission fluid as needed. Replace dipstick and drive 10 to 15 minutes to circulate fluid. Depending on transmission problem, results will either be immediate or noticeable within a few days of driving. In transmissions with seriously damaged components a second treatment may be required. In this case, it is suggested that the transmission fluid and filter be changed and a second application of Rislone Transmission Stop Slip be added.

Automatic Transmission (Changing Fluid)
If using Rislone Transmission Stop Slip when changing transmission fluid, add entire contents of bottle after filter is changed. Then refill with manufacturer’s recommended fluid to proper level. Drive vehicle and recheck fluid level.

Manual Transmission
May be used in manual/standard “stick” transmissions to top off the fluid level to stop leaks, noise and grinding gears. Will not help with slipping in manual transmissions.

Use in ALL light duty and heavy duty vehicles including; car, truck, van, SUV, and RV’s with any 3 speed, 4 speed, 5 speed, electronic, overdrive, automatic or manual transmission. On manual transmissions it will only help with leaks, noise and hard or loose shifting, but not slipping.

Compatible with ALL types of domestic and import transmission fluid; including petroleum and synthetic formulas.

Frequently Asked Questions

How does Rislone Transmission Stop Slip with Leak Repair Work?
Rislone Transmission Stop Slip with Leak Repair contains a special blend of viscosity improvers, anti-wear friction modifiers and extreme pressure performance additives to solve most transmission problems. These additives reduce rough shifting and friction, while eliminating slip, controlling temperature, and repairing shudder, chatter and whining.

How long does it take to start working?
Depending on the transmission problem, results will either be immediate or noticeable within a few days of driving.

If first application does not completely solve my problem, may I add another bottle?
Yes, for severe problems or badly worn transmissions, use double the dosage or a second bottle.

Will Rislone Transmission Stop Slip with Leak Repair work in my vehicle?
Yes, it works with any front wheel drive, rear wheel drive, all-wheel drive and 4 wheel drive transmissions. Do not use in CVT transmissions. Use in ALL light duty and heavy duty vehicles including; car, truck, van, SUV, and RV’s with any 3 speed, 4 speed, 5 speed, 6 speed, electronic, overdrive, automatic or manual transmission. On manual transmissions it will only help with leaks, noise and hard or loose shifting, but not slipping.

Is it compatible with synthetic formulas?
Yes, it is compatible with ALL types of domestic and import transmission fluid; including petroleum and synthetic formulas.

How much do I install?
The 946 mL Rislone Transmission Stop Slip with Leak Repair is designed to treat 11 to 15 liters of transmission fluid. For compact and smaller vehicles, use ½ of the bottle.

Can I use in a manual/standard “stick” transmission?
Yes, the Rislone Transmission Stop Slip with Leak Repair will work in manual/standard “stick” transmissions to top off the fluid level to stop leaks, noise and grinding gears.

Can I add to my existing transmission fluid?
Yes, remove transmission dipstick and check fluid level. For most vehicles this is usually done while the engine is running and the transmission is in park. The transmission dipstick is usually located near the engine oil dipstick but further back into the engine compartment. Some vehicles do not have a normal dipstick. For those, the product has to be added to the transmission through a fill plug. Consult owner’s manual for location. If fluid is low, pour entire contents of the bottle into the dipstick tube. Do NOT overfill.
For compact and smaller vehicles, use ½ of the bottle. If necessary, to prevent overfill, drain some fluid from transmission. Check fluid level again. Top off with manufacturer’s recommended transmission fluids as needed. Replace dipstick and drive 10 to 15 minutes to circulate fluid.

Will Rislone Transmission Stop Slip with Leak Repair harm my transmission?
No, the product is completely safe to use and will not harm any part of the transmission system.

Technical Information

SAFETY DATA SHEET
CODE: 44502
SIZE: 946ML