RISLONE Radiator Stop Leak Concentrate
RISLONE Radiator Stop Leak Concentrate
Rislone Radiator Stop Leak Concentrate is specially designed to stop minor cooling system leaks and drips caused by normal cooling system wear and age. Works with ALL Types and Colours of Antifreeze Coolant and/or Water.
- Stops & Seals Coolant Leaks
- Seals Leaks in Radiators, Gaskets, Heater Cores & Freeze Plugs
- Works with ALL Types and Colours of Antifreeze Coolant and/or Water
Dosage & Directions
Dosage
Passenger cars and light trucks—Use one bottle for 6 & 8 cylinders and half bottle for 4 cylinder engines. Small engines or other small systems use approximately 20 mL per liter of fluid capacity. Over the road and heavy-duty equipment—Install one bottle for every 15 liters of coolant capacity.
Directions
- Shake well and pour into radiator after engine cools
- Fill radiator and overflow tank to proper level and reinstall cap
- Drive or idle engine for 15 to 30 minutes
- Leave in cooling system for continued protection
- For preventative maintenance, use once a year to help guard against future leaks
Opening cooling system while engine is hot or running may cause severe burns.
Disposal
Observe local laws and regulations. Where permitted, dispose of in sanitary sewer systems. Never pour onto the ground or storm sewer system.
Compatibility
Do not mix or install with any other product. If another product has been installed, flush the system thoroughly.
Frequently Asked Questions
Can Rislone Radiator Stop Leak be installed in existing antifreeze coolant?
Yes, it works with all types and colours of antifreeze coolant and/or water.
Will Rislone Radiator Stop Leak work in the new extended life antifreeze?
Yes, Rislone Radiator Stop Leak works with all types and colours of antifreeze coolant and/or water.
Do I need to drain my cooling system after using Rislone Radiator Stop Leak?
No, this product is designed to be left in the cooling system to protect from future leaks and overheating.
How long does it take to see results?
We recommend you drive/idle the vehicle for 15 to 30 minutes. In most cases the leak will be sealed instantly, but others will require up to 30 minutes. If the leak is not sealed in 30 minutes, a second application may be required, or mechanical repair may be needed.
Will Rislone Radiator Stop Leak plug my heater core?
No, Rislone® Radiator Stop Leak will not clog a clean heater core. If using it to stop heater core leaks, make sure you turn your heater control to HOT. Some vehicles have a valve that controls coolant flow through the core and is only opened in the HOT position.
What are the dosage recommendations?
Passenger cars and light trucks—Use one bottle for 6 & 8 cylinders and half bottle for 4 cylinder engines. Small engines or other small systems use approximately 20 mL per liter of fluid capacity. Over the road and heavy-duty equipment—Install one bottle for every 15 liters of coolant capacity.
Can I install Rislone in my overflow reservoir?
Yes, if direct access to the radiator cap is not available, install in overflow tank.
I accidently added the Rislone Radiator Stop Leak into my engine oil, what should I do?
It is only designed to be added to the cooling system. If the product is installed in the engine oil and the engine has not been started, in many cases you can remove the valve cover and drain the oil leaving the drain plug off. Then use an engine flush washing out the head keeping special attention to the oil return holes that run down to the oil pan. Clean these out and pour the engine flush down these holes flushing everything into the oil pan and out the drain hole. If the engine has been run, you need to take the vehicle to have a professional mechanic evaluate what can be done to clean the inside of the engine. This might include taking the engine apart to clean all of the parts.
Technical Information
SAFETY DATA SHEETCODE: 41196
SIZE: 325ML