RISLONE Radiator Cleaner & Flush

• Fast, easy and safe to use on all cooling system materials, including plastic and aluminum. Works with all cooling systems.
• Eliminates damaging coolant deposits, reducing engine operating temperature to prevent overheating.
• Neutralizes acids that cause corrosion and helps prevent formation of future scale deposits.
• Heavy Duty Xtreme Clean™ formula cleans entire cooling system.
• Removes deposits and coolant gel for a complete cleaning in 30 minutes or less.
• Use every time changing coolant for light flushing or heavy duty cleaning.
• Clean systems run cooler.

Dosage & Directions

Dosage
1 bottle treats up to 14L systems.

Directions

1. With engine off and cool, drain system.
2. Close drain and add entire contents of bottle, then refill system with water. Reinstall cap, start engine, turn heat on high, and run engine for 10 to 15 minutes. Turn engine off and allow to cool, drain system.
3. Flush cooling system and reservoir until water runs clear. TIP: Using a flush “T” with garden hose works best for final cleaning.
4. Refill cooling system and reservoir with manufacturer’s recommended antifreeze/water mixture.
   

For best results add Rislone Super Coolant after flushing the system, as the metal surfaces inside the system are now cleaned and primed for optimal heat transfer performance and corrosion protection.

Disposal
Observe local laws and regulations. Where permitted, dispose of in a sanitary sewer system. Never pour on the ground or in a storm sewer system.

Frequently Asked Questions

Do I have to drain my radiator first?
Yes, per the label directions you are supposed to drain the system and install just water.

Does Radiator Cleaner & Super Flush contain acid?
No, and it requires no neutralizing.

Can this be used with copper, aluminum and plastic radiators?
Yes, since this contains no acid, you can use in old and newer vehicles with copper, aluminum and plastic radiators.

Will Hy-per Cool Radiator Cleaner & Super Flush hurt my cooling system?
No, it is a non-acid formula and is safe to use on all cooling system materials. It is harmless to all parts of the cooling system, including aluminum.

What are the dosage recommendations?
Use one 340 mL bottle of Radiator Cleaner & Flush, part number 41212, for every 14 liters of capacity.

The bottle froze before I was able to use it, what can I do?
If the bottle did not break from freezing, just let the product thaw out, shake well, and use as normal.

Technical Information

SAFETY DATA SHEET
CODE: 41212
SIZE: 340ML