RISLONE Hy-per Diesel Complete Fuel System Treatment

Rislone® Hy-per Diesel™ Complete Fuel System Cleaner improves the quality of Diesel fuel by increasing its cleaning ability, adding lubrication, removing contaminants, fighting corrosion, and helping to prevent the fuel from gelling & going bad. This one dual cavity bottle contains the same amount of additives equal to a bottle of regular injector & complete fuel system cleaner, anti-gel cold flow improver, fuel stabilizer & conditioner, Cetane booster & diesel treatment, ULSD sulfur substitute, and UCL pump & injector lubricant.  Simply put, it is the best all in one diesel fuel additive money can buy. 

• Cleans Injectors, Valves and the Combustion Chamber
• Boosts Cetane, Power, Performance and Mileage
• Stabilizes Fuel, Lubricates and Protects
• Helps eliminate black smoke, fuel gelling, clogged injectors, rough idle and hard starts.

Dosage & Directions

Dosage
1 bottle treats up to 132L of diesel.

For continued protection and cleaning, use one bottle every 8,000 kilometres. Will not void manufactures new vehicle warranty and safe to use on vehicles which have converters, particulate filters, or use DEF systems. Results will either be immediate or noticeable within a few days of driving. To keep the system clean and lubricated in-between treatments, use Rislone Fuel Injector Cleaner Upper Cylinder Lubricant.

Directions

For nearly empty petrol tank

1. Remove cap and foil seal. Tightly screw spout onto bottle
2. Gently tip bottle and completely insert spout tip into petrol tank tube opening, allowing entire contents to empty into the tank.
3. Fill vehicle up with fuel (treats up to 80L)

For nearly full petrol tank

1. Remove cap and foil seal. Tightly screw spout onto bottle
2. Gently tip bottle and completely insert spout tip into petrol tank tube opening, allowing entire contents to empty into the tank. 

Compatibility

Rislone Diesel Treatment is compatible with Rislone Injector Cleaner.

This product includes a specially designed spout which allows the product to easily be poured into all diesel fuel tanks. To use, bend spout and tear away on the perforated tab.

Frequently Asked Questions

What does Rislone Diesel Fuel System Treatment do?
Rislone Diesel Fuel System Treatment improves the quality of diesel fuel by increasing its cleaning ability, adding lubrication, removing contaminants, fighting corrosion, and helping to prevent the fuel from gelling & going bad. Simply put, it is the best all in one diesel fuel additive money can buy.

How does Rislone Diesel Fuel System Treatment work?
It literally contains a combination of almost every type of diesel fuel additive on the market including injector & complete fuel system cleaner, anti-gel cold flow improver, fuel stabilizer & conditioner, Cetane booster & diesel treatment, ULSD sulfur substitute, and UCL pump & injector lubricant.

How can this reduce a noisy fuel system?
The UCL (Upper Cylinder Lubricant) additive lubricates the fuel pump, injectors and upper cylinder to reduce friction & wear, reducing noise.

How much will my fuel economy improve?
This varies depending on the age of the vehicle, the quality of the fuel used, and how dirty the system is. It is normal for larger increases in MPK on the first dosage and then it will usually taper off and flatten out from the second dosage on. For best results use every 8000 kilometres or with every oil change.

Will this work with all types of Diesel Fuel?
Yes, Rislone Diesel Fuel System Treatment is designed to work with all diesel engines including ULSD Ultra Low Sulphur Diesel and Bio Diesel Fuel.

Will this harm the catalytic converter or diesel particulate filters?
No, this will not harm your engine or any emissions components including catalytic converters, particulate filters, EGR valve or DEF systems.

How much do I use?
P/N 44740/500 mL bottle – Use anytime in a nearly full tank, or add to tank and then fill with up to 130 litres of diesel fuel. For smaller tanks from 40 to 70 litres, use ½ bottle pouring equal amounts from each side. Larger tanks use one bottle for every 110 litres of fuel.

How many points will it boost the Cetane level?
Typical numbers show a 1 to 2 point increase in Cetane level.

How low will it improve Cold Filter Plugging Point (CFPP)?
Typical results show up to 13°C reduction in the Cold Filter Plugging Point (CFPP).

Can this replace the lubricant in the ULSD Ultra Low Sulphur Diesel Fuel?
Yes, Rislone Diesel Fuel System Treatment is an excellent lubricant and will replace the lost additives in the new reformulated diesel fuel.

What does EZ Nozzle™ Spout mean?
The EZ Nozzle is the name for the patented spout attached to the bottle. This allows the product to be safely and easily poured into all fuel tanks, including diesels with misfueling device systems. Because it is designed like a regular diesel fuel nozzle you would see at your fuel station, it allows the product to work in all diesel vehicles.

Can I use in my intercooled, turbo charged or direct injected engine?
Yes, this is safe to use and works in all domestic & import, car & truck regular, intercooled, turbo charged and directed injected diesel engines.

What is a misfueling device?
Some diesel vehicles have a special fuel tank receptacle that only allows a fuel station nozzle the specific size for diesel to be installed in the vehicle. This prevents accidentally adding petrol to the vehicle. But this also makes it much more difficult to use additives in those vehicles. The Rislone Diesel Fuel System Treatment bottle contains a special spout which allows it to work in these vehicles.

Technical Information

SAFETY DATA SHEET A
SAFETY DATA SHEET B
CODE: 44740
SIZE: 500ML