RISLONE High Kilometre Transmission Stop Slip with Leak Repair

Automatic Transmissions do not work without fluid, nor do they work well without the correct fluid.  Automatic Transmission Fluid (ATF) is one of the most complex of all lubricating fluids.  It has to reduce friction enough to prevent wear and control temperature while at the same time allowing some friction to prevent the internal clutch material from slipping.  This same fluid must operate at low and high temperature extremes. Rislone Transmission Stop Slip with Leak Repair contains a special blend of viscosity improvers, anti-wear friction modifiers and extreme pressure performance additives to solve most transmission problems.  These additives reduce rough shifting and friction, while eliminating slip, controlling temperature, and repairing shudder, chatter and whining.  Excellent to use as a preventative maintenance product.  Use to top off existing fluid when low  or add a bottle when changing fluid.  Specifically designed for higher kilometre/mileage vehicles over 100,000 kilometres.

• Performance additives restore bands & clutches to stop slip, eliminate hesitation and reduce rough shifting.
• Renews and stabilizes automatic transmission fluid (ATF) reducing noise, shudder and chatter.
• Perfect additive for poorly maintained transmissions.
• Premium formula restores transmission performance and saves on costly transmission / transaxle repairs.
• Stops fluid loss, reduces friction & wear, and protects internal components.
• Lowers operating temperature, the number one cause of transmission failure.
• Works with any front wheel drive, rear wheel drive, all-wheel drive and four wheel drive automatic transmission. Do not use in CVT transmission.
• Use in ALL light duty and heavy duty vehicles including; car, truck, van, Utes, SUV, and RV’s with any 3 speed, 4 speed, 5 speed, 6 speed, electronic, overdrive, automatic or manual transmission. On manual transmissions it will only help with leaks, noise and hard or loose shifting, but not slipping.

Compatible with ALL types of domestic and import transmission fluid; including petroleum and synthetic formulas.

Dosage & Directions

Dosage
One bottle will treat 11 to 15 litres of transmission fluid.  For compact and smaller vehicles, use ½ of the bottle.  Do not overfill.

Directions
Automatic Transmission (Adding to Existing Fluid)
Remove transmission dipstick and check fluid level.  For most vehicles this is usually done while the engine is running and the transmission is in Park.
Tip:  The transmission dipstick is usually located near the engine oil dipstick, but further back into the engine compartment. Some vehicles do not have a normal dipstick.  For those, the product has to be added to the transmission through a fill plug.  Consult owner’s manual for location. If fluid is low, pour entire contents of the bottle into the dipstick tube.  Do NOT overfill.  For compact and smaller vehicles, use ½ of the bottle.
Tip:  If necessary, to prevent overfill, drain some fluid from transmission.  Check fluid level again.  Top off with manufacturer’s recommended transmission fluid as needed. Replace dipstick and drive 10 to 15 minutes to circulate fluid. Depending on transmission problem, results will either be immediate or noticeable within a few days of driving. In transmissions with seriously damaged components a second treatment may be required.  In this case, it is suggested that the transmission fluid and filter be changed and a second application of Rislone Transmission Stop Slip be added.

Automatic Transmission (Changing Fluid)
If using Rislone Transmission Stop Slip when changing transmission fluid, add entire contents of bottle after filter is changed.  Then refill with manufacturer’s recommended fluid to proper level.  Drive vehicle and recheck fluid level.

Manual Transmission
May be used in manual / standard “stick” transmissions to top off the fluid level to stop leaks, noise and grinding gears.

Frequently Asked Questions

How does Rislone Transmission Stop Slip with Leak Repair Work?
Rislone Transmission Stop Slip with Leak Repair contains a special blend of viscosity improvers, anti-wear friction modifiers and extreme pressure performance additives to solve most transmission problems. These additives reduce rough shifting and friction, while eliminating slip, controlling temperature, and repairing shudder, chatter and whining.

How long does it take to start working?
Depending on the transmission problem, results will either be immediate or noticeable within a few days of driving.

If first application does not completely solve my problem, may I add another bottle?
Yes, for severe problems or badly worn transmissions, use double the dosage or a second bottle.

Will Rislone Transmission Stop Slip with Leak Repair work in my vehicle?
Yes, it works with any front wheel drive, rear wheel drive, all-wheel drive and four wheel drive transmissions. Do not use in CVT transmissions. Use in ALL light duty and heavy duty vehicles including; car, truck, Utes, SUV, and RV’s with regular step type, electronic, overdrive, automatic or manual transmission. With manual transmissions it will only help with leaks, noise and hard or loose shifting, but not slipping.

Is it compatible with synthetic formulas?
Yes, it is compatible with ALL types of domestic and import transmission fluid; including petroleum and synthetic formulas.

How much do I install?
The 500ml Rislone Transmission Stop Slip with Leak Repair, part number 44501, is designed to treat a normal passenger car, SUV or light truck transmission. For larger systems use one bottle for every 8 litres of transmission fluid.

Can I use in a manual/standard 'stick' transmission?
Yes, the Rislone Transmission Stop Slip with Leak Repair will work in manual / standard “stick” transmissions to top off the fluid level to stop leaks, noise and grinding gears.

Can I add to my existing transmission fluid?
Yes, remove transmission dipstick and check fluid level. For most vehicles this is usually done while the engine is running and the transmission is in park.
Tip: The transmission dipstick is usually located near the engine oil dipstick but further back into the engine compartment. Some vehicles do not have a normal dipstick. For those, the product has to be added to the transmission through a fill plug. Consult owner’s manual for location. If fluid is low, pour entire contents of the bottle into the dipstick tube. Do NOT overfill. For compact and smaller vehicles, use ½ of the bottle.
Tip: If necessary, to prevent overfill, drain some fluid from transmission. Check fluid level again. Top off with manufacturer’s recommended transmission fluids as needed. Replace dipstick and drive 10 to 15 minutes to circulate fluid.

Will Rislone Transmission Stop Slip with Leak Repair harm my transmission?
No, the product is completely safe to use and will not harm any part of the transmission system.

Technical Information

SAFETY DATA SHEET
CODE: 44501
SIZE: 500ML