RISLONE Block Seal Permanent Head Gasket Fix
RISLONE Block Seal Permanent Head Gasket Fix
Rislone Block Seal Head Gasket Fix is the easiest solution to stop head gasket coolant leaks. No draining of the cooling system is required. One step formulation contains a combination of antifreeze compatible sodium silicate sealing liquid and various size gasket sealing particles which penetrate gaps and cracks then harden to permanently stop leaks. This works because of the extreme heat inside the combustion chamber (2750°C) that acts as a catalyst to permanently harden the material to make it stronger than the actual head gasket itself. Your vehicle is a good candidate for this product if it can idle for 20 minutes without overheating or having to add coolant.
- Safely Seals Gasket And Other Severe Leaks
- Quickly and Permanently Stops Coolant Leaks
- One Step—No Draining Required—Easy To Use
- Use with ALL types of traditional or extended life coolant
Dosage & Directions
Dosage
One bottle treats cooling systems from 7.6 liters to 15 liters. Use ½ bottle for cooling systems from 3.75 liters to 7.5 liters. For larger systems use one bottle for every 15 liters of cooling system capacity. Most 6 and 8 cylinder engines will use one bottle, and most 3 and 4 cylinder engines will use ½ bottle.
Tip: If direct access to radiator is not available and if overflow tank is pressurized, you can install in tank.
Directions
- Allow engine to cool. Make sure engine is cool enough so radiator cap can be safely removed.
- Fill radiator and overflow tank to proper level and reinstall radiator cap.
- Start engine.
- Turn heater on hot and fan on high.
- Idle engine for 15 minutes.
- Allow engine to cool so cap can be safely removed.
- Top off radiator and leave Rislone Block Seal Head Gasket Fix in cooling system for continued protection. Drive vehicle as normal.
Cooling systems that are dirty or partially clogged should be flushed before usage. Protect from freezing. Protect bottle from freezing.
Compatibility
Use with ALL types of 50-50 mix antifreeze including conventional green or blue (Silicate-Based) and extended life red/orange or yellow (OAT/HOAT) coolant, and/or water.
Suitable for use in petrol, diesel, turbo, LPG and racing engines.
Frequently Asked Questions
Can Rislone Head Gasket Fix be installed in existing antifreeze?
Yes, it is compatible with ALL types and brands of traditional or extended life coolant including yellow, orange, pink, red, blue, purple and green silicate based & non-silicate based (OAT/HOAT) 50-50 mix antifreeze, and/or water. Systems that are dirty or partially clogged, a flush is recommended before use.
Can it be installed in a diesel engine?
Yes, it works with ALL gasoline and diesel engines.
How does this type of product work?
Rislone Head Gasket Fix formulation contains a combination of antifreeze compatible sodium silicate sealing liquid and various size gasket sealing particles which penetrate gaps & cracks and harden to permanently stop leaks.
What if I don’t have direct access to the radiator?
If direct access to radiator is unavailable and if reservoir / overflow tank is pressurized, you can install in tank. Otherwise remove top hose where it connects to the top of the radiator and install product in hose. Reattach hose and tighten clamp.
Does Rislone Head Gasket Fix permanently repair leaks?
Yes, it is a permanent solution for your cooling system leaks. What do we mean by permanent? It is not designed to be temporary, or a quick fix like other brands. Just like replacing a head gasket will not last forever, neither will Head Gasket Fix. Millions of bottles have been sold since the product was developed in 2004 successfully sealing leaks for many years and tens of thousands of kilometres.
Do I need to drain my radiator after the leak has been repaired?
No, top off radiator and leave Rislone Bock Seal Head Gasket Fix in cooling system for continued protection and drive vehicle as normal.
What are the dosage recommendations?
One bottle treats cooling systems from 7.6 liters to 15 liters. Use ½ bottle for cooling systems from 3.75 liters to 7.5 liters. For larger systems use one bottle for every 15 liters of cooling system capacity. Most 6 and 8 cylinder engines will use one bottle, and most 3 and 4 cylinder engines will use ½ bottle.
Will Rislone Block Seal Head Gasket Fix plug my heater core?
No, Rislone Head Gasket Fix will not clog your clean heater core, it is safe and effective. If using Rislone Head Gasket Fix to stop heater core leaks, make sure you turn your heater control to HOT. Some vehicles have a valve that controls coolant flow through the core.
I accidently added the Rislone Block Seal Head Gasket Fix into my engine oil, what should I do?
Rislone Head Gasket Fix is only designed to be added to the cooling system. If the product is installed in the engine oil and the engine has not been started, in many cases you can remove the valve cover and drain the oil leaving the drain plug off. Then use an engine flush washing out the head keeping special attention to the oil return holes that run down to the oil pan. Clean these out and pour the engine flush down these holes flushing everything into the oil pan and out the drain hole. If the engine has been run, you need to take the vehicle to have a professional mechanic evaluate what can be done to clean the inside of the engine. This might include taking the engine apart to clean all of the parts.
Technical Information
SAFETY DATA SHEET
CODE: 41111
SIZE: 680G