RISLONE ENGINE REPAIR 500ml image
Engine

RISLONE ENGINE REPAIR 500ml

SKU: 44110

44110 RESULTS Icons2

  • Repairs
  • Stops Leaks
  • Cleans
  • Performance
  • Lubricates
  • Increases Compression
  • Increases Oil Pressure
  • Stops Noise
  • Stops Smoking
  • Increases Horsepower
  • Adds Protection

Wear and tear naturally occurs inside engines, even today’s modern engines suffer with low oil pressure, loss of compression, leaks, smoking, noise and higher fuel consumption.

Rislone Engine Repair contains a combination of the industry’s best performance additives to repair these oil related problems. Oil is the life blood of your engine, and is pumped under pressure to all moving parts, the main parts that require oil for lubrication are the bearings and pistons. As your engine ages and gains more kilometres the oil alone can’t do the job as the internal parts don’t fit as tightly as they originally did which is the leading cause of noise and loss of power. Bearings wear down, seals start to leak, lifters tick and blow-by can occur.

Rislone Engine Repair helps to stop and prevent these problems by improving the performance of worn cylinders, rings, bearings, and seals also extending the useful life of your engine. Rislone Engine Repair restores lost compression and power, reduces noise and oil consumption, while improving the performance of worn cylinders, rings, bearings, and seals.

Engine oils are generally used to reduce friction between moving parts, in addition to this, the oil must cool, provide corrosion protection and be a method of removing contaminants. As the oil degrades, the properties change, leading to increased friction and wear. Over time the natural wear that occurs inside the engine causes reduced oil pressure, loss of compression (power loss), lower fuel kilometres, oil consumption (leaks & smoking) and noise (knocking & ticking). Rislone Engine Repair can be used to top off the existing oil when low, or add a bottle when changing the oil & filter. Compatible with ALL types of engine oils, including petroleum, synthetic and high-kilometre formulas.

DIRECTIONS:
When Adding To Existing Engine Oil

Remove engine dipstick and check oil level. If oil is low, remove oil cap and install entire contents of the two chamber bottle. Do NOT overfill. Top off with manufacturers recommended engine oil as needed. Reinstall dipstick and oil cap.

Drive/idle engine for 10-15 minutes.

Depending on the engine problem, results will either be immediate or noticeable within two (2) days or 150km of driving. In engines with seriously damaged components, a second treatment may be required. In this case, it is suggested that the oil and filter be changed, and a second application of Engine Repair be added.

When Changing Oil
If using Engine Repair when changing oil, add entire contents of bottle after filter is changed. Then refill with manufacturer’s recommended oil to proper level.

Drive vehicle and recheck oil level.

DOSAGE:
1 bottle treats 4 to 6 litres of oil.

Chamber A

Chamber B

Premium Semi-Synthetic Base Stock
Synthetic oil and synthetic ester

Performance Additives
Resist oil breakdown

Extreme Pressure Agents
Help protect moving parts

Friction Modifiers
Reduce friction

Detergents
Clean, keep sludge suspended

Seal Conditioners
Stop and prevent leaks caused by seal aging

Tackifiers
Lubricate, enhance viscosity, and improve stability

Synthetic Blend

Anti-Wear Preventative Prevents wear on metal surfaces

Viscosity Improver Restore viscosity, stop blow-by, increase compression, and reduce engine noise

COMPATIBILITY:
Rislone Engine Repair is compatible with ALL 4, 5, 6, 8 and 10 cylinder petrol, diesel, turbocharged, LPG and hybrid engines. Rislone Engine Repair works with any conventional, high kilometre and synthetic engine oils, and can be added at any time.

Rislone Engine Repair is compatible with Rislone Engine Treatment, Rislone Engine Oil Stop Leak Concentrate and Rislone Rear Main Seal Repair.

FREQUENTLY ASKED QUESTIONS

How does Rislone Engine Repair work?
Engine Repair contains a combination of the best performance additives to repair the most common oil-related problems. Engine Repair restores lost compression and power, reduces noise and oil consumption, while improving the performance of worn cylinders, rings, bearings, and seals.

Will Rislone Engine Repair clog my oil filter?
No, Rislone Engine Repair does not contain any sticky substances that would clog or damage your oil filter. It works chemically to stop leaks in gaskets and seals.

Will Rislone Engine Oil Stop Leak work in synthetic oil?
Yes, Rislone Engine Repair is compatible with ALL types of engine oils, including petroleum, synthetic and high-kilometre formulas

Isn’t Engine Oil Enough?
Engine oils are generally used to reduce friction between moving parts. In addition to lubricating, motor oil must cool, provide corrosion protection and is a method of removing contaminants. As lubricants degrade, their properties change, leading to increased friction and wear. Over time the natural wear that occurs inside the engine causes reduced oil pressure, loss of compression (power loss), lower fuel kilometre, oil consumption (leaks & smoking) and noise (knocking & ticking).

Can I add to existing oil?
Yes, remove engine dipstick and check oil level. If oil is low, remove oil cap and install entire contents of the two chamber bottle. Do NOT overfill. Top off with manufacturers recommended engine oil as needed. Reinstall dipstick and oil cap. Drive/idle engine for 10-15 minutes.

If I install more than the recommend amount, will it work faster or better?
No, we have formulated our product to work best at the suggested dosage amount.

What are the dosage recommendations?
One 500 mL bottle of Rislone Engine Repair, part number 44110, treats 4 to 6 litres of oil.

If first application does not completely stop my leak, may I add another bottle?
Yes, in engines with seriously damaged components, a second treatment may be required. In this case, it is suggested that the oil and filter be changed, and a second application of Engine Repair be added.

How long does it take to start working?
Rislone Engine Repair starts working the minute you install and start driving the vehicle. You will usually see results in about 150 km or two (2) days of driving.

Datasheets