RISLONE Automatic Transmission Repair - 2 Part Formula

Automatic Transmissions do not work without fluid, nor do they work well without the correct fluid. Automatic Transmission Fluid (ATF) is one of the most complex of all lubricating fluids. It has to reduce friction enough to prevent wear and control temperature while at the same time allowing some friction to prevent the internal clutch material from slipping. This same fluid must operate at low and high temperature extremes.

• Reduces Heat, Friction & Stabilizes Fluid
  
• Adds Protection

Dosage & Directions

Dosage
1 bottle treats 9.4 to 11.4L of transmission fluid.

Directions
Adding to Existing Transmission Fluid

1. Remove transmission dipstick and check fluid level. For most vehicles this is usually done while the engine is running and the transmission is in Park. 
   Tip: The transmission dipstick is usually located near the engine oil dipstick but further back into the engine compartment. Some vehicles do not have a normal dipstick. For those, the product has to be added to the transmission through a fill plug. Consult owner’s manual for location.
2. If fluid is low, pour entire contents of the two chamber bottle into the dipstick tube. Do NOT overfill.
   Tip: If necessary, to prevent overfill, drain some fluid from transmission.
3. Check fluid level again. Top off with manufacturer’s recommended transmission fluids as needed.
4. Replace dipstick and drive 10 to 15 minutes to circulate fluid.
5. Depending on transmission problem, results will either be immediate or noticeable within 2 days or 150 km of driving.
6. In transmissions with seriously damaged components a second treatment may be required. In this case, it is suggested that the transmission fluid and filter be changed and a second application of Transmission Repair be added. 

Changing Fluid

1. If using Transmission Repair when changing transmission fluid, add entire contents of bottle after filter is changed.
2. Refill with manufacturer’s recommended fluid to proper level.
3. Drive vehicle and recheck fluid level.

Do not use Rislone Automatic Transmission Repair in CVT transmissions.

Frequently Asked Questions

How does Rislone Transmission Repair work?
After time, transmission seals tend to dry out and shrink and internal parts become worn. Rislone Transmission Repair reduces rough shifting and friction, while eliminating slip, controlling temperature, and repairing shudder, chatter and whining. Premium high mileage formula restores transmission performance.

Will Rislone Transmission Repair work in all types of transmission fluid?
Yes, Rislone Transmission Repair is formulated to work in all types of transmission fluid. Use in regular automatic transmissions. Do not use in CVT transmissions.

If first application does not completely stop my problem, may I add another bottle?
In transmissions with seriously damaged components a second treatment may be required. In this case, it is suggested that the transmission fluid and filter be changed and a second application of Transmission Repair be added.

If I install more than the required amount, will it work faster or better?
No, we have formulated our product to work best at the suggested dosage amount.

How long does it take to start working?
Rislone Transmission Repair starts working the minute you install and start driving the vehicle. You will usually see results in about 150 kilometres or 2 days of driving.

Technical Information

SAFETY DATA SHEET A
SAFETY DATA SHEET B
CODE: 44540
SIZE: 500ML